Technologies

3D X-ray

In order to provide our patients with advanced, reliable and highest possible quality services, from now on we use in our Clinic modern Sirona Orthophos XG 3D machine produced in Germany for 3D imaging. The image is taken quickly and safely, and with the minimal dose of ionizing radiation. Where a panoramic X-ray is taken, radiation flux is up to 25 microsieverts (0.025 mSv), i.e. about 100 times smaller than, e.g., by performing the head computed tomography, and taking a 3D X-ray – about 100 microsieverts (0.1 mSv). After this diagnostic test, doctors get very accurate, undistorted and real images of the upper and lower…

CEREC 3D

Modern new technologies have also changed the methods of dental treatment. We are all aware that in order to have healthy teeth, you need to carefully monitor their condition and visit a dentist every six months. You can visit our office without fear of pain – we use modern equipment and advanced materials. The entire treatment process can be monitored on the screen - all procedures are shot by an intraoral camera. Images are taken by an X-ray machine the radiation of which is reduced to a minimum. Most of the filling materials serve only 2-5 years. By replacing a filling with the new one,…

VITA Easyshade

A need to identify the exact tooth colour appears as technology and cosmetic dentistry develops. Not only patients but also dentists require this because the human eye due to various reasons (e.g., lighting) cannot determine the colour accurately and the all-ceramic development provides an opportunity to produce dentures, which practically do not differ from natural teeth. In our Clinic, tooth colour is determined using the Easyshade machine. This is a small spectrophotometer. Its readings are stable and very accurate. “Unlike the human eye, the Easyshade spectrophotometer determines the colour of the tooth objectively and describes it according to the 3D.Master colour palette. Accuracy of measurement…

Lithium disilicate glass ceramics E-max CAD

We offer Ivoclar Vivadent crowns, veneers, inlays, onlays produced from lithium disilicate blocks (e-max CAD). Tensile strength of teeth made of these units is 360 MPa, which is twice higher than that of conventional units and four times larger than ceramic used for decoration on metal. Teeth made from these blocks are initially slightly bluish, their resistance is up to 160 MPa, and they can be measured in the mouth. After about 30 minutes of crystallisation in an oven, they obtain proper colour and flexural strength of 360 MPa. There is no need to fix restorations made of e-max by adhesive systems; they can be…

@ 2016 Skaitmeninės odontologijos centras